Stock water pump impellers are plastic and prone to failure. This can cause severe engine damage from overheating and can even suffer from coolant passages being blocked by pieces of the broken impeller.
The DLP YXZ water pump impeller is made...
dd another layer of protection over your GYTR Turbo Filter Element with an Outerwears Pre-Filter designed specifically for this applicationMade to fit the GYTR Turbo Foam Filter
Genuine Yamaha GYTR Turbo Performance Filter. Designed to fit over any 3" intake pipe.
Add another layer of protection with an Outerwears pre-filter designed specifically for this filter
Outerwears Pre-Filter for the Uni-Pod FilterThis fits the Uni-Pod filter that comes standard with the DLP Turbo Kits:
Powermaster 70 Amp Alternator - this is a direct replacement for the 50amp alternator on the DLP YXZ Alternator kit.
Purchase the complete kit here:
DLP YXZ Alternator Kit
Made in the USA
Yamaha OEM Clutch Plate 1 for the YXZ
Brand new Yamaha Friction 2 Plate
Vance & Hines YXZ Header - works with any slip-on Muffler designed to fit the stock exhaust.
Stepped design, primaries taper from 1.50" to 1.75"
304 Stainless Steel
3-into-1 Merge Collector
Oxygen Sensor bung - plug included
Made in the...
Replaces the plastic factory plug on the stator / magneto cover
-8 ORB female fitting for attaching an oil drain
Comes with an O-ring to seal against the stator cover
Made in the U.S.A.
Yamaha OEM Crankcase Cover Gasket
Photos above are one of our prototypes. The final piece will be similar but may differ slightly in overall appearance
Machined out of aircraft grade billet aluminum.
This is a direct replacement for the stock plastic fuel rail on the Yamaha...
DLP Stage 3 Turbo Kit for the YXZ takes the proven formula from our Stage 1 and 2 kits, and upgrades the turbo to a Garrett GT2860RS with .86 AR
270 rear wheel horsepower.
Built around a 9.5:1 Compression engine which is tuned for pump gas,...
This fitting was designed for the racing community which typically doesn't have a parking brake. There may be fitment issues with this fitting and the stock parking brake.
Installing custom oil lines on your YXZ is now easier than ever.
Installing custom oil lines on your YXZ is now easier than ever
The DLP oil pump fitting attaches in place of the factory fitting next to the stock oil cooler
Instead of a barbed end, you now have a -10AN male end
Designed and made...
Unlike most other YXZ Turbo Kits, the DLP Turbo Kit comes fully tuned. No need to mess around with piggy back adaptors or paying another shop to do your tuning. We flash the Yamaha ECU with our own in house tuning files.
Great for the DIY'er. Build your own intake manifold or intercooler.
This is the same plenum base used in our YXZ Intercooler
Base CNC'd out of billet aluminum.
Intake runners feature a proper bell-mouth shape for the best airflow.
The end of...
Made out of billet aluminum, this in-line sensor adaptor has two 5/8" hose barbs with a 1/8" NPT fitting, common to most sensor fittings.
The intake air temperature sensor is a vital part of the Yamaha fuel injection system. The factory harness for this sensor is very short, don't risk damaging the sensor or the harness by stretching it too tight!With the DLP Intake Air Temp Sensor...
The ultimate solution to oil starvation issues for your YXZ.
This is NOT just a larger replacement tank over the stock unit. The internal design was tested over multiple years of off-road racing with several different drivers. Over two dozen...
Custom DLP Turbo Tune for your YXZThese are built to order, please contact us to verify if the build you are doing is compatible with our tunes before ordering.
Replacement breather filter for DLP turbo and air intake system
Yamaha Kit - OEM Yamaha Parts
This is the spec kit for our Stage 1, 2, and 3 Turbo Kits
9.5:1 Compression piston and connection rod set
Sidewinder Head Bolts
Wrist Pins and clips
Upgraded head gasket
Oil Pan Gasket
Dirt Launch Powersports Yamaha YXZ 1000 580CC Upgraded Fuel Injectors
Is your turbocharged Yamaha YXZ1000 in need of more fuel?
Dirt Launch Powersports has you covered with our 580CC YXZ Fuel Injectors.
Flow Tested and Flow...
Dirt Launch Powersports YXZ Billet Front Knuckles, price is for each knuckle.
Comes complete with the hardware shown in the photo along with a new Yamaha wheel bearing and circlip.
Designed and CNC'd in House at our Green Bay facility. ...
© 2023 Dirt Launch Powersports
Powered by BigCommerce
All rights reserved.