Replaces the plastic factory plug on the stator / magneto cover
-8 ORB female fitting for attaching an oil drain
Comes with an O-ring to seal against the stator cover
Made in the U.S.A.
Made out of billet aluminum, this in-line sensor adaptor has two 5/8" hose barbs with a 1/8" NPT fitting, common to most sensor fittings.
The ultimate solution to oil starvation issues for your YXZ.
This is NOT just a larger replacement tank over the stock unit. The internal design was tested over multiple years of off-road racing with several different drivers. Over two dozen...
Manufactured by DLP at our Green Bay facility. Designed in collaboration with Casey Hauck.
No clatter or potential skipping of camshaft timing on start up after oil changes. If a chain is partially stretched already this can happen with...
Replacement breather filter for DLP turbo and air intake system
Yamaha Kit - OEM Yamaha Parts
This is the spec kit for our Stage 1, 2, and 3 Turbo Kits
9.5:1 Compression piston and connection rod set
Sidewinder Head Bolts
Wrist Pins and clips
Upgraded head gasket
Oil Pan Gasket
Dirt Launch Powersports Adjustable Billet Water Pump Housing Cover is here!
This direct replacement Billet Water Pump cover has a water neck that can be rotated 360 degrees to make it easier for running your coolant lines any which way you...
YXZ Sport Shift Billet Clutch Upgrade
The day has finally come where Sport Shift YXZs can RELIABLY make over 200WHP (Wheel Horsepower)!
Through extensive testing we have found that even with the GYTR billet clutch upgrade,...
DLP 2019+ intake shield
Installing one of our Dirt Launch Powersports air intake systems is a great way to improve the performance and power of your Yamaha YXZ.
The 2019+ intake shield consists of two pieces...
Dirt Launch Powersports Shimless 1-Piece Valve Buckets: Yamaha YXZ1000R
Reduce the risk of dropping a valve by eliminating the shim under bucket design with these single piece bucket shims
No more spit shims
Dirt Launch Powersports YXZ1000r Valve spring kit
Performance spring kit with Chromoly retainers for the 2016+ Yamaha YXZ1000r
Help prevent spit valve shims
Set of 12 springs with Chromoly retainers
Utilized with the...
Yxz1000r Pressure Plate Upgrade
Converts stock diaphragm clutch spring to six coil springs and provides a more progressive, linear engagement. Included is a billet aluminum pressure plate, six heavy duty springs, spring cups and bolts. Replaces...
Purchasing a DLP turbo kit? This is a MUST HAVE when adding boost to your Sport Shift YXZ1000r The GYTR basket is taller than the OEM basket allowing more friction disks to be added along with more efficient oiling to keep the clutch working to its...
The Dirt Launch Powersports aluminum throttle body brace is a must have for any racer or boosted application
Designed to keep the throttle body in place when bottoming out over jumps
Completely hidden and out of the way once...
Run cooler and have extra coolant temperature switch ports with our Dirt Launch Powersports Billet Thermostat Delete Kit made specifically for the Yamaha YXZ1000R. CNC-machined from a solid piece of aluminum, our Thermostat Delete Kit...
Replace the plastic factory crankshaft bolt access plug in your Yamaha YXZ1000R with our custom-machined Dirt Launch Powersports Stator cover Plug. Unlike the original, this won't get stripped out or broken. Instead of using an Allen...
Installing one of our Dirt Launch Powersports air intake system is a great way to improve the performance and power of your Yamaha YXZ. We are now offering an air intake shield to keep dirt and mud from spraying up on the intake. Custom...
Replacement air filter for the Dirt Launch Powersports air intake system
This filter ONLY fits the Dirt Launch Powersports air intake system for the Yamaha YXZ1000r
Made in the USA
This simple and easy to install oil distribution block allows you to add up to 2 additional oil ports to your Yamaha YXZ 1000R engine. Precision CNC milled from aircraft aluminum for a perfect fit and a lifetime of use...
Replacement pre-filter for Dirt Launch Powersports air intake system. This item fits the Yamaha YXZ1000R model only.
⚠WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
When preparing your Yamaha YXZ for closed course use its common to delete the air injection (Smog) system from the engine. This allows for a more accurate air fuel ratio reading when tuning and weight savings by removal of unnecessary equipment...
© 2023 Dirt Launch Powersports
Powered by BigCommerce
All rights reserved.