Replaces the plastic factory plug on the stator / magneto cover
-8 ORB female fitting for attaching an oil drain
Comes with an O-ring to seal against the stator cover
Made in the U.S.A.
O-Ring to AN 90 Degree Adapter Fitting
Male 6AN ORB
90 Degree Swivel
O-Ring to AN 45 Degree Adapter Fitting
Male 6AN ORB
45 Degree Swivel
6AN EFI Quick Disconnect 90 Degree Fitting
5/16" Quick Connect
Same Fitting as the stock YXZ Fuel Rail
O-Ring to AN Adapter Fitting
6AN Straight Cut O-Ring Male
6AN ORB Male Straight Adapter
6AN Straight Cut O-Ring to -6AN Male
-6 AN O-Ring
If you are upgrading your fuel rail while retaining the stock fuel line connections, this is the adapter you'll need
Same Male Barb fitting found on the stock YXZ fuel rail with a -6AN Male ORB connection to install on your new fuel rail
This adaptor is for folks who are upgrading their fuel rail and would like to retain use of the stock fuel pressure damper
The stock damper is held in place by a snap ring (included)
Our adaptor will work with any -6AN ORB Female fitting
Installing custom oil lines on your YXZ is now easier than ever.
-12AN Oil Suction Fitting
CNC out of billet aluminum
Designed and made in-house at our Green Bay facility
Comes a new O-ring
Don't forget the oil pump-10AN fitting...
Installing custom oil lines on your YXZ is now easier than ever
The DLP oil pump fitting attaches in place of the factory fitting next to the stock oil cooler
Instead of a barbed end, you now have a -10AN male end
Designed and made...
Designed and Machined in house at our Green Bay facility out of aircraft grade aluminum.
-8 ORB Male to -8AN Male Fitting
Overall length of 2.4 inches
© 2023 Dirt Launch Powersports
Powered by BigCommerce
All rights reserved.