Dirt Launch Powersports Stage 2 Turbo Upgrade for the 2019+ YXZ1000R
Upgrade your current DLP stage 1 turbo kit to a stage 2
Preliminary Stage 2 testing nets a result of 270 flywheel horsepower on a completely stock unit
The 2019 Stage 2 turbo kit utilizes the factory fuel pump with 12psi of boost
Includes larger injectors that will support upwards of 200 wheel HP
Improved cold start and all around drive ability
Tuning is all done through the factory ECU
Electronic boost controller with ECU Boost control
New OEM ECU is INCLUDED in the price
Compatible with both SS and manual shift models
** IMPORTANT NOTE ** Running High boost (12psi) does require Higher Octane. 97 or higher octane should be used. Whether that be straight race fuel or a mixture of race fuel and pump gas. 91 octane pump gas can still be used when using the low boost (7psi) setting.
Donaldson Intake upgrade: We highly recommend this optional Donaldson intake system for dusty or wet conditions. We designed this intake upgrade to mount the filter housing above the bed to prevent water from entering the intake when driving through water crossings or puddles. This kit includes a billet mounting bracket to bolt to the stock roll cage, a small Donaldson intake housing with dual filters for maximum filtration, and all of the intake couplers and mounting hardware required for install
High/ Low Boost Harness: This allows you to switch between 12psi and 7psi of boost with the flip of a switch. Allowing you to turn the power down when it's not needed or run 91 octane when race fuel is not available
Stage 8 locking fastener upgrade, when installed properly, will not allow the turbo mounting bolts to come loose with expansion and contraction with heat cycles of the turbo
*Due to the abundance of recent orders there will be a one to two week lead time before shipment*
âš WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
